Today I used a Scotch Brite pad to prep the end caps of the Stabilator for priming. I then pushed the priming station outside and primed the exposed webs and the flanges of these exposed end caps.
Sam Jespersen
Welcome
This Blog is my attempt to record and display the building process of my Van's RV-12 Experimental Light Sport Aircraft. I am a first time builder.
N419AJ
This is the completed airplane
Blog Archive
-
▼
2010
(165)
-
▼
March
(22)
- Tailcone Skin Installation Started
- Fuselage Bulkhead
- Tailcone Assembly Continues
- Progress Inspections
- Tailcone Assembly Begins
- Stabilaotr Skins
- Wing Storage Rack and Horses
- Beginning to Attach Stabilator Skin
- Stabilator Skeleton Emerges
- Stabilator Hinge Bushings
- Primed Stabilator Ribs
- Counterbalance Brackets and Arm
- Primed Exposed Stabilator End Caps
- Stabilator Ribs and End Caps
- Rivet Stabilator Spar Components
- Primed Stabilator Spar Components
- Started Stabilator
- Riveted Rudder Skin
- Rudder Skeleton Assembly
- Completed the Anti Servo Tabs
- Anti Servo Tabs (continued)
- Anti Servo Tabs
-
▼
March
(22)