Today I made a propeller fixture similar to
the one made by Tony Tesstitorie's. I
made it out of some scrap aluminum angle I had at home. I taped it to my electronic level and discovered
the blades are 1.1o out of being equally set. I will work on getting them as close to the
same angle as possible in the very near future.
I also emailed Gus at Van's with the
information from my post yesterday. He
suggested I make certain the power to the nav lights is going from pin 33 on
the optional connector to pin 6 in the wing connection. If that is the case the problem is not
swapped pins.
