This evening I installed the cables for the Shoulder Harnesses. These cables attach to the straps at the upper fuselage at the rear baggage bulkhead. There are 2-cables, one for the pilot on the left side and one for the co-pilot (passenger) on the right side.
I then prepared the rudder pedal closeout pieces. I separated them and removed the blue vinyl film. Next I deburred the edges and dimpled the holes for the nutplate rivets. I also dimpled the nutplates. I primed the pieces and riveted the nutplates as indicated.
They can now be installed to closeout the space aft of the rudder pedals at the top of the forward tunnel and the engine compartment shelf forward of the instrument shelf.
