Monday, September 29, 2014

Short Flight Over Herriman

Today was another first.  Arlene’s brother, Allen and his wife Shirleen came for a visit.  We drove to the airport and I took Allen up for a short flight.  We did a touch and go and then flew out over Herriman to the south.  I was very pleased with the performance of the RV-12.   This is the first time I have had a full grown man in the passenger seat.  Allen and I are about the same size and I had 17 gallons of fuel on board.  That made us pretty close to gross weight.  The RV-12 flew exceptionally well.  We had a great time.  After the flight Arlene took our picture.  Then Arlene and Shirleen climbed in and I took their picture.

Friday, September 26, 2014

Short Flight On A Windy Day


I was able to go up for a short flight this morning.  My schedule for the last few days has made it impossible to go out to the airport.  Today I have the time but the winds are starting to pick-up in front of a coming storm.  I dropped Tim (my grandson) off at work and headed to the airport.  It was about 8:30 am when I got into the air.  I was afraid the wind was going to start increasing so I stayed in the pattern.  I flew for nearly an hour working on take-offs and landings.  Upwind from runway 16 is a corn maze the farmer does each year.  Today I extended my upwind and took a picture. The kids in the area really like to go there in the evenings.  They come from all around the valley. 
After doing 6 touch and goes I put the airplane back in the hangar.  I went down to the local gas station and purchased some gas, returned to the hangar and fueled the airplane.  I am ready to go up again when the weather permits.

Tuesday, September 16, 2014

Two Days of Flying

Yesterday and today I went up for 2+ hours each day.  Yesterday I took off from South Valley Regional and did 3-touch-and-goes.  I then flew to the Tooele valley and did 2-more touch-and-goes at the Tooele airport.  From there I flew south over the city and into the Cedar Valley.  I flew to the south side of the valley and there I calibrated the AOA (angle of attack).  To do so I needed to establish a fast cruise and then fly some +5 deg /-5 deg maneuvers to give the AOA a base line.  I then performed 3-different stalls.  The first stall was clean, no flaps.  The second was a stall with 1 notch of flaps.  The third stall was full flaps.  After completing each stall I pushed the “stall” button on the SkyView.  I now have the AOA widget on the PFD next to the airspeed tape.  It is really great to see that I have sufficient lift to fly.  Or in other words, I am not exceeding the angle of attack. 
Today I flew down to Delta.  I used the autopilot.  I entered a very small flight plan with 2-waypoints.  The first was the Nephi airport and the second was the Delta airport.  I turned on the autopilot and activated the flight plan (HSI & ALT).  The airplane performed flawlessly.  After reaching Delta I switched to altitude and heading hold (TRK & ALT).  I flew down to Holden, over to Scipio and back up through Nephi and back to South Valley Regional.  What a fun time I had.  I took a picture of Cedar Valley over Fairfield Peak.

Thursday, September 11, 2014

More Touch-and-Goes

Today I had a few minutes of open time.  Who said being retired was going to be a walk in the park. Like I have heard so many before me say, now that I am retired I don’t know how I had time to go to work.  This is crazy.  I stopped and purchased 10 gals of fuel on my way to the airport.  I fueled the airplane and because of time limitations I was only able to fly for 0.7 hours.  I stayed in the pattern and did 6-more touch-and-goes. The pattern was pretty quiet this morning.  Only one other airplane took off and started some pattern work as I was finishing up.  I had a great though short time.   This is a sweet little airplane to fly.

Wednesday, September 10, 2014

Did 6-Touch-and-Goes

I went out to the airport early this morning.  I pulled the airplane out onto the apron and did a pre-flight.  Everything was in order.  I got in, started the engine and allowed the oil temperature to come up.  The oil pressure was fine, the servos connected and all was good.  After the oil temperature was up I taxied out to the run-up area for runway 16.  There was a helicopter doing closed pattern work and mine was the only other aircraft entering the pattern.  I took off and it was wonderful to be in the air again.  Because of time restraints I could only do some touch-and-goes.   There was a slight cross wind.  The wind was 220 at 6.  After the touch-and-goes I taxied back to the hangar and put the airplane away.
I have only 6 –gallons of gas in the tank so I loaded up my fuel cans.  I will buy some fuel on my next trip out.