I pulled the blue film off of the left side skin and clecoed it to the frames and lower corner skin. I clecoed the skins to the frame and the lower corner skins. I riveted the skins to the frames, to each other and to the fuselage bulkhead.
I then pulled the WH-P30 trim control wire through the J stiffener and wire-tied it in place. I taped the coil of wire to the floor of the tailcone as instructed.
I then pulled a sting from the front of the tailcone through the frames and trough the top stabilator pull hole and back trough the bottom stabilator control hole. I taped the ends of the string to the floor of the tailcone.
